OERTZEN High pressure cleaners - von Oertzen GmbH - accessories catalogue

OERTZEN High pressure cleaners - Accessories

Below you will find an overview of original accessories for OERTZEN high pressure cleaners. To receive more exact results please use configurator on right hand side of the screen.

Selected Filters: there are currently no filters selected

Base frame INOX for stationary hp cleaners

Base frame INOX for stationary hp cleaners

Base frame INOX (800 x 450 x 500 mm / 31.2 x 17.5 x 19.5 in LxWxH) for OERTZEN stationary high pressure aggregates S 323 VA, S 334 VA, S 350 VA

Order-number: 710.000.551

Details »

Bending lance

Bending lance

Bending lance, INOX, with variable regulation of bending angle 20-140°, e.g. for underbody cleaning, roofs or other areas difficult to access - max. 210 bar / 3045 psi, 150°C / 302°F, length 600 mm / 23.4 in, 1/4", hand nut connection

Handle bar (please always order additionally 710.700.024) locks lance in chosen bending angle - left or right hand side position.

Order-number: 710.700.023

Details »

Connection nipple 1/4"i x M22 x 1.5

Connection nipple 1/4"i x M22 x 1.5

Connection nipple 1/4"i x M22 x 1.5 for coupling of hp hoses

Order-number: 710.703.131

Details »

Connection nipple 3/8"i x M22 x 1.5

Connection nipple 3/8"i x M22 x 1.5

Connection nipple 3/8"i x M22 x 1.5 for coupling of hp hoses

Order-number: 710.703.132

Details »

Double spray lance 380 mm

Double spray lance 380 mm

Double spray lance with pressure regulation, 350 bar / 5075 psi, INOX, length 380 mm / 14.8 in, no-tool coupling, HIP flat stream nozzle, nozzle protection cap

Option: Ex-design - for use in explosion endangered areas

Order-number: 710.700.020

Details »

Double spray lance 490 mm

Double spray lance 490 mm

Double spray lance with pressure regulation, 350 bar / 5075 psi, INOX, length 490 mm / 19.1 in, no-tool coupling, HIP flat stream nozzle, nozzle protection cap

Option: Ex-design - for use in explosion endangered areas

Order-number: 710.700.021

Details »

Double spray lance 660 mm

Double spray lance 660 mm

Double spray lance with pressure regulation, 350 bar / 5075 psi, INOX, length 660 mm / 25.7 in, no-tool coupling, HIP flat stream nozzle, nozzle protection cap

Option: Ex-design - for use in explosion endangered areas

Order-number: 710.700.022

Details »

Drain cleaning 1000 bar, hose

Drain cleaning 1000 bar, hose

Drain cleaning hose 1000 bar / 14500 psi, 10 m / 33 ft, nominal diameter 5, with drill nozzle - for OERTZEN cold water hp aggregate D/E 1000

Order-number: 751.400.873

Details »

Drain cleaning 1000 bar, hose adapter/nozzle

Drain cleaning 1000 bar, hose adapter/nozzle

Adapter/nozzle for drain cleaning hose 1000 bar / 14500 psi for OERTZEN maximum pressure aggregate D/E 1000

Order-number: 750.500.833

Details »

Drain cleaning 1000 bar, turbo rocket nozzle

Drain cleaning 1000 bar, turbo rocket nozzle

Drain cleaning turbo (rotating) rocket nozzle 1000 bar / 14500 psi, for OERTZEN maximum pressure aggregate D/E 1000

Order-number: 751.500.868

Details »

Drain cleaning set 310/312 Profi

Drain cleaning set 310/312 Profi

Drain cleaning set for OERTZEN cold water hp cleaner 310 Profi/312 Profi, with red, super light, super low friction drain cleaning hose 22 m / 72 ft, ND 6, with tangle-free press connections, manually exchangeable rocket nozzle and rocket drill-nozzle 1/4" - for removal of blockings, grease and sand in drains up to 200 mm / 7.8 in diameter
- 32 m / 105 ft or 42 m / 138 ft hose lengths on request

Order-number: 710.800.063

Details »

Drain cleaning set 311/314 Profi

Drain cleaning set 311/314 Profi

Drain cleaning set for OERTZEN cold water hp cleaner 311 Profi/314 Profi, with red, super light, super low friction drain cleaning hose 22 m / 72 ft, ND 6, with tangle-free press connections, manually exchangeable rocket nozzle and rocket drill-nozzle 1/4" - for removal of blockings, grease and sand in drains up to 200 mm / 7.8 in diameter
- 32 m / 105 ft or 42 m / 138 ft hose lengths on request

Order-number: 710.800.064

Details »

Drain cleaning set 310/312 Profi

Drain cleaning set 310/312 Profi

Drain cleaning set for OERTZEN cold water hp cleaner 310 Profi/312 Profi, with DRAINJET6 hose 22 m / 72 ft, low-friction surface, ND 6, with tangle-free press connections, manually exchangeable rocket nozzle and rocket drill-nozzle 1/4" - for removal of blockings, grease and sand in drains up to 200 mm / 7.8 in diameter
- 32 m / 105 ft or 42 m / 138 ft hose lengths on request

Order-number: 710.800.051

Details »

Drain cleaning set 311/314 Profi

Drain cleaning set 311/314 Profi

Drain cleaning set for OERTZEN cold water hp cleaner 311 Profi/314 Profi, with DRAINJET6 hose 22 m / 72 ft, low-friction surface, ND 6, with tangle-free press connections, manually exchangeable rocket nozzle and rocket drill-nozzle 1/4" - for removal of blockings, grease and sand in drains up to 200 mm / 7.8 in diameter
- 32 m / 105 ft or 42 m / 138 ft hose lengths on request

Order-number: 710.800.050

Details »

Drain cleaning set 500 bar

Drain cleaning set 500 bar

Drain cleaning set 500 bar / 7250 psi, industrial version, with drain cleaning hose 33 m / 108 ft, max. 500 bar / 7250 psi, ND 8, manually exchangeable 3/8" rocket nozzle and rocket drill-nozzle, other lengths of hose on request - for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter

710.800.060 with 53 m / 174 ft drain cleaning hose

Order-number: 710.800.061

Details »

Drain cleaning set 500 bar with reel, 33 m

Drain cleaning set 500 bar with reel, 33 m

like drain cleaning set 710.800.061
plus hose reel (500 bar / 7250 psi)

Drain cleaning set 500 bar with reel 33 m, industrial version, with drain cleaning hose 33 m / 108 ft, max. 500 bar / 7250 psi, manually exchangeable 3/8" rocket nozzle and rocket drill-nozzle, other lengths of hose on request - for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter

Order-number: 710.800.059

Details »

Drain cleaning set 500 bar with reel, 53 m

Drain cleaning set 500 bar with reel, 53 m

like drain cleaning set 710.800.061
plus hose reel (500 bar / 7250 psi)

Drain cleaning set 500 bar with reel 53 m, industrial version, with drain cleaning hose 53 m / 174 ft, max. 500 bar / 7250 psi, manually exchangeable 3/8" rocket nozzle and rocket drill-nozzle, other lengths of hose on request - for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter

Order-number: 710.800.058

Details »

Drain cleaning hose 200 bar 07 m

Drain cleaning hose 200 bar 07 m

Drain cleaning hose, 1/8", nominal diameter 5, length 7 m / 23 in, max. 200 bar / 2900 psi

Order-number: 710.702.259

Details »

Drain cleaning hose 200 bar 10 m

Drain cleaning hose 200 bar 10 m

Drain cleaning hose, 1/8", nominal diameter 5, length 10 m / 33 ft, max. 200 bar / 2900 psi

Order-number: 710.702.258

Details »

Drain cleaning hose 200 bar 15 m

Drain cleaning hose 200 bar 15 m

Drain cleaning hose, 1/8", nominal diameter 5, length 15 m / 49 ft, max. 200 bar / 2900 psi

Order-number: 710.702.260

Details »

Drain cleaning hose 200 bar 20 m

Drain cleaning hose 200 bar 20 m

Drain cleaning hose, 1/8", nominal diameter 5, length 20 m / 66 ft, max. 200 bar / 2900 psi

Order-number: 710.702.262

Details »

Drain cleaning hose 200 bar 35 m

Drain cleaning hose 200 bar 35 m

Drain cleaning hose, 1/8", nominal diameter 5, length 35 m / 115 ft, max. 200 bar / 2900 psi

Order-number: 710.702.261

Details »

Drain cleaning set 500 bar, only for E 500-17

Drain cleaning set 500 bar, only for E 500-17

Drain cleaning set 500 bar / 7250 psi, only for E 500-17, industrial version, with drain cleaning hose 33 m / 108 ft, manually exchangeable 3/8" rocket and rocket drill nozzle, with fitting socket for coupling to hp lance, other hose lengths on request - for removal of blockings, grease and sand in production drains and pipes up to 350 mm / 13.6 in diameter

with 53 m / 174 ft hose: 710.800.069

Order-number: 710.800.068

Details »

Drain cleaning hose, ND 6, 300 bar, 11 m, red

Drain cleaning hose, ND 6, 300 bar, 11 m, red

Drain cleaning hose ND 6, 1/4", 300 bar / 4350 psi, 11 m / 36 ft, super smooth and light, red colour

Order-number: 710.702.250

Details »

Drain cleaning hose, ND 6, 300 bar, 22 m, red

Drain cleaning hose, ND 6, 300 bar, 22 m, red

Drain cleaning hose ND 6, 1/4", 300 bar / 4350 psi, 22 m / 72 ft, super smooth and light, red colour

Order-number: 710.702.251

Details »

Drain cleaning hose, ND 6, 300 bar, 32 m, red

Drain cleaning hose, ND 6, 300 bar, 32 m, red

Drain cleaning hose ND 6, 1/4", 300 bar / 4350 psi, 32 m / 105 ft, super smooth and light, red colour

Order-number: 710.702.252

Details »

Drain cleaning hose, ND 6, 300 bar, 42 m, red

Drain cleaning hose, ND 6, 300 bar, 42 m, red

Drain cleaning hose ND 6, 1/4", 300 bar / 4350 psi, 42 m / 138 ft, super smooth and light, red colour

Order-number: 710.702.253

Details »

DRAINJET6, drain cleaning hose 11 m

DRAINJET6, drain cleaning hose 11 m

DRAINJET6, hose for drain cleaning, 1/4", nominal diameter 6, super smooth, length 11 m / 33 ft, max. 500 bar / 7250 psi

Order-number: 710.702.350

Details »

DRAINJET6, drain cleaning hose 22 m

DRAINJET6, drain cleaning hose 22 m

DRAINJET6, hose for drain cleaning, 1/4", nominal diameter 6, super smooth, length 22 m / 72 ft, max. 500 bar / 7250 psi

Order-number: 710.702.351

Details »

DRAINJET6, drain cleaning hose 32 m

DRAINJET6, drain cleaning hose 32 m

DRAINJET6, hose for drain cleaning, 1/4", nominal diameter 6, super smooth, length 32 m / 105 ft, max. 500 bar / 7250 psi

Order-number: 710.702.352

Details »

DRAINJET6, drain cleaning hose 42 m

DRAINJET6, drain cleaning hose 42 m

DRAINJET6, hose for drain cleaning, 1/4", nominal diameter 6, super smooth, length 42 m / 138 ft, max. 500 bar / 7250 psi

Order-number: 710.702.353

Details »

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.7

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.7

Drain cleaning rocket drill nozzle 1/4" INOX, bore 4 x 0.7 mm, 250 bar / 3625 psi max.

Order-number: 710.720.407

Details »

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.8

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.8

Drain cleaning rocket drill nozzle 1/4" INOX, bore 4 x 0.8 mm, 250 bar / 3625 psi max.

Order-number: 710.720.408

Details »

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.9

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 0.9

Drain cleaning rocket drill nozzle 1/4" INOX, bore 4 x 0.9 mm, 250 bar / 3625 psi max.

Order-number: 710.720.409

Details »

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 1.0

Drain cleaning rocket drill nozzle 1/4" INOX 4 x 1.0

Drain cleaning rocket drill nozzle 1/4" INOX, bore 4 x 1.0 mm, 250 bar / 3625 psi max.

Order-number: 710.720.410

Details »

Drain cleaning rocket nozzle 1/4" INOX 3x1.1

Drain cleaning rocket nozzle 1/4" INOX 3x1.1

Drain cleaning rocket nozzle 1/4" INOX, bore 3 x 1.1 mm, 250 bar / 3625 psi max.

Order-number: 710.720.311

Details »

Drain cleaning rocket nozzle 1/4" INOX 3x0.8

Drain cleaning rocket nozzle 1/4" INOX 3x0.8

Drain cleaning rocket nozzle 1/4" INOX, bore 3 x 0.8 mm, 250 bar / 3625 psi max.

Order-number: 710.720.308

Details »

Drain cleaning rocket nozzle 1/4" INOX 3x0.9

Drain cleaning rocket nozzle 1/4" INOX 3x0.9

Drain cleaning rocket nozzle 1/4" INOX, bore 3 x 0.9 mm, 250 bar / 3625 psi max.

Order-number: 710.720.309

Details »

Drain cleaning rocket nozzle 1/4" INOX 3x1.0

Drain cleaning rocket nozzle 1/4" INOX 3x1.0

Drain cleaning rocket nozzle 1/4" INOX, bore 3 x 1.0 mm, 250 bar / 3625 psi max.

Order-number: 710.720.310

Details »

Drain cleaning rocket nozzle 1/4" INOX 4x1.1

Drain cleaning rocket nozzle 1/4" INOX 4x1.1

Drain cleaning rocket nozzle 1/4" INOX, bore 4 x 1.1 mm, 250 bar / 3625 psi max.

Order-number: 710.720.411

Details »

Drain cleaning turbo rocket nozzle 1/4" INOX (070)

Drain cleaning turbo rocket nozzle 1/4" INOX (070)

Drain cleaning turbo (rotating) rocket nozzle 1/4" INOX 3 x 1.0 mm

Order-number: 710.722.310

Details »

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.9 (055)

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.9 (055)

Drain cleaning turbo (rotating) rocket nozzle 1/4" INOX, bore 3 x 0.9 mm (055)

Order-number: 710.722.309

Details »

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.8

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.8

Drain cleaning turbo (rotating) rocket nozzle 1/4" INOX, bore 3 x 0.8 mm

Order-number: 710.722.308

Details »

Drain cleaning turbo rocket nozzle 1/4" INOX 3x1.1 (100)

Drain cleaning turbo rocket nozzle 1/4" INOX 3x1.1 (100)

Drain cleaning turbo (rotating) rocket nozzle 1/4" INOX, bore 3 x 1.1 mm (100)

Order-number: 710.722.311

Details »

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.7

Drain cleaning turbo rocket nozzle 1/4" INOX 3x0.7

Drain cleaning turbo (rotating) rocket nozzle INOX, bore 3 x 0.7 mm

Order-number: 710.722.307

Details »

Drain cleaning rocket drill nozzle 3/8" INOX (052)

Drain cleaning rocket drill nozzle 3/8" INOX (052)

Drain cleaning rocket drill nozzle 3/8" INOX (052), 500 bar / 7250 psi max., recommended for OERTZEN cold water hp aggregate S 334 H

Order-number: 710.719.777

Details »

Drain cleaning rocket drill nozzle 3/8" INOX (065)

Drain cleaning rocket drill nozzle 3/8" INOX (065)

Drain cleaning rocket drill nozzle 3/8" INOX (065), 500 bar / 7250 psi max.

Order-number: 710.719.788

Details »

Drain cleaning rocket nozzle 3/8" INOX (050)

Drain cleaning rocket nozzle 3/8" INOX (050)

Drain cleaning rocket nozzle 3/8" INOX (050), 500 bar / 7250 psi max., recommended for OERTZEN cold water hp aggregate S 334 H

Order-number: 710.719.078

Details »

Drain cleaning rocket nozzle 3/8" INOX (065)

Drain cleaning rocket nozzle 3/8" INOX (065)

Drain cleaning rocket nozzle 3/8" INOX (065), 500 bar / 7250 psi max.

Order-number: 710.719.099

Details »

Drain cleaning rocket nozzle 3/8" INOX (077)

Drain cleaning rocket nozzle 3/8" INOX (077)

Drain cleaning rocket nozzle 3/8" INOX (077), 500 bar / 7250 psi max.

Order-number: 710.719.077

Details »

Drain cleaning rocket nozzle 3/8" INOX 088 (055)

Drain cleaning rocket nozzle 3/8" INOX 088 (055)

Drain cleaning rocket nozzle 3/8" INOX 088 (055), 500 bar / 7250 psi max.

Order-number: 710.719.088

Details »

Drain cleaning turbo rocket nozzle 3/8" INOX 050

Drain cleaning turbo rocket nozzle 3/8" INOX 050

Drain cleaning turbo (rotating) rocket nozzle 3/8" INOX 050, 250 bar / 3625 psi max.

Order-number: 710.722.318

Details »

Drain cleaning turbo rocket nozzle 3/8" INOX 080

Drain cleaning turbo rocket nozzle 3/8" INOX 080

Drain cleaning turbo (rotating) rocket nozzle 3/8" INOX 080, 250 bar / 3625 psi max.

Order-number: 710.722.320

Details »

Drain cleaning set Mini

Drain cleaning set Mini

Drain cleaning set Mini comprising of drain cleaning hose, nominal diameter 5, length 7 m / 23 in, with ball valve, maximum 200 bar / 2900 psi, mini rocket-drill nozzle 4 x 0.8 mm

Order-number: 710.800.048

Details »

Drain cleaning kit MINI 1/8"

Drain cleaning kit MINI 1/8"

Drain cleaning hose 200 bar 2900 psi, 10 m / 33 ft, nominal diameter 2, with drill nozzle - for OERTZEN cold water hp cleaner 312 Profi

Order-number: 710.800.052

Details »

Drain cleaning rocket drill nozzle Mini

Drain cleaning rocket drill nozzle Mini

Drain cleaning rocket drill nozzle Mini, 1/8", bore 4 x 0.8 mm for high pressure drain cleaning, 200 bar / 2900 psi

Order-number: 710.721.408

Details »

E 1500 / E 1700 ultra high pressure hose/cable set 10 m

E 1500 / E 1700 ultra high pressure hose/cable set 10 m

Ultra high pressure hose/cable set 10 m / 33 ft, 1500 bar / 21750 psi, 1700 bar / 24650 psi with joint, for OERTZEN cold water hp aggregates E 1500/E 1700

Order-number: 710.000.519

Details »

E 1500 / E 1700 ultra high pressure hose/cable set 20 m

E 1500 / E 1700 ultra high pressure hose/cable set 20 m

Ultra high pressure hose/cable set 20 m / 66 ft, 1500 bar / 21750 psi, 1700 bar / 24650 psi, with joint, for OERTZEN cold water hp aggregates E 1500/E 1700

Order-number: 710.000.520

Details »

Control cable E 1800/E 2500

Control cable E 1800/E 2500

Control cable for electronic controlled spray gun E 1800/E 2500, 50 m / 164 ft

Order-number: 755.000.010

Details »

Spray equipment 3000 bar

Spray equipment 3000 bar

Spray equipment 3000 bar / 43500 psi, uhp lance and electronic controlled spray pistol, overall length 1130 mm / 44 in, weight 3,35 kg / 7.5 lb, water temperature 50°C / 122°F max., easy actuation, support handle/bar, hp connection M 26 x 1,5

Order-number: 755.000.006

Details »

High pressure hose 10 m, 2500 bar

High pressure hose 10 m, 2500 bar

High pressure hose 10 m, 2500 bar / 36250 psi, DN 5, length 10 m / 33 ft, blue, with wire mesh protection

Order-number: 755.000.004

Details »

High pressure hose 20 m, 2500 bar

High pressure hose 20 m, 2500 bar

Ultra high pressure hose 20 m, 2500 bar / 36250 psi, DN 8, length 20 m / 66 ft, red, with wire mesh protection

option: ultra high pressure hose 20 m, 3000 bar / 43500 psi, DN 8, length 20 m / 66 ft, red, with wire mesh protection, order no. 755.000.194

Order-number: 755.000.003

Details »

Rotor jet

Rotor jet

Rotor jet, rotating nozzle for 3 point jets (0,25 - 1,4 mm on demand), 3000 bar / 43500 psi, rpm control by magnetic brake, weight 2,1 kg / 4.1 lb, connecting thread M 14 x 1,5 LH

Order-number: 755.000.160

Details »

Rotorjet, 3200 bar

Rotorjet, 3200 bar

Rotorjet (Masterjet PC 1), 90 - 130 N recoil, order no. 755.000.243 (standard onboard unit E 1800/E 2500), rotating nozzle tray fpr4 point jets (dimensions 0.25 - 1.4 mm on request), 500 - 3200 bar / 7250 - 46400 psi max., rpm control by magnetic brake, weight 1,2 kg / 2.8 lb, connection M14 x 1.5LH / 9/16" - 18 UNF LH

Order-number: 755.000.243

Details »

Swivel joint 3000 bar

Swivel joint 3000 bar

Swivel joint 3000 bar, mounted between pistol and hose, prevents curling up of hose

Order-number: 755.000.001

Details »

Economy injector

Economy injector

Economy injector feeds detergent with low pressure into hp water stream behind high pressure pump, fixed admix rate 10%, serially with all of OERTZEN's high pressure cleaners up to 5.5 kW

Order-number: 710.306.041

Details »

ECOPRESS pressure test device 50 bar

ECOPRESS pressure test device 50 bar

ECOPRESS pressure test device 50 bar / 725 psi max., for pressure testing of pipe lines

Order-number: 710.000.882

Details »

HP cleaning plant, block clamp INOX

HP cleaning plant, block clamp INOX

HP cleaning plant, block clamp INOX for pipelines, for wall mounting of tubes and pipelines for OERTZEN stationary high pressure cleaning systems

Order-number: 710.000.367

Details »

HP cleaning plant, block clamp galvanized steel

HP cleaning plant, block clamp galvanized steel

HP cleaning plant, block clamp galvanized steel, for wall mounting of tubes and pipelines for OERTZEN stationary high pressure cleaning systems

Order-number: 710.000.379

Details »

HP cleaning plant, pipe 18 x 2 mm galvanized steel

HP cleaning plant, pipe 18 x 2 mm galvanized steel

HP cleaning plant, pipe 18 x 2 mm galvanized steel18 x 2 mm / 0.7 x 0.08 in, seamless, sold by the metre (delivery batch 6 m / 20 ft), for pipelines with OERTZEN stationary high pressure cleaning systems

Order-number: 710.000.382

Details »

HP cleaning plant, pipe 18 x 2 mm INOX V2A

HP cleaning plant, pipe 18 x 2 mm INOX V2A

HP cleaning plant, pipe INOX V2A18 x 2 mm / 0.7 x 0.08 in, seamless, sold by the metre (delivery batch 6 m / 20 ft), for pipelines with OERTZEN stationary high pressure cleaning devices

Order-number: 710.000.385

Details »

HP cleaning plant, pipe 18 x 2 mm INOX V4A

HP cleaning plant, pipe 18 x 2 mm INOX V4A

HP cleaning plant, pipe 18 x 2 mm INOX V4A, 0.7 x 0.08 in, seamless, sold by the metre (delivery batch 6 m / 20 ft), for pipelines with OERTZEN stationary high pressure cleaning systems

Order-number: 710.000.384

Details »

HP cleaning plant, pulsation absorber (pipeline)

HP cleaning plant, pulsation absorber (pipeline)

HP cleaning plant, pulsation absorber (pipeline), avoids shocks in the pipeline system

Order-number: 710.000.357

Details »

HP cleaning plant, pulsation absorber (pump)

HP cleaning plant, pulsation absorber (pump)

HP cleaning plant, pulsation absorber (pump), avoids shocks in the piping system

Order-number: 710.000.358

Details »

HP cleaning plant, spray lance holder INOX

HP cleaning plant, spray lance holder INOX

HP cleaning plant, spray lance holder INOX, coated, floor mounted

Order-number: 710.702.049

Details »

HP cleaning plant, tapping connection, galvanized steel

HP cleaning plant, tapping connection, galvanized steel

HP cleaning plant, tapping connection, galvanized steel, with ball valve, for connection of spring-coiled hose reel or spray equipments with pipeline system

Order-number: 710.000.383

Details »

HP cleaning plant, tapping connection INOX V4A

HP cleaning plant, tapping connection INOX V4A

HP cleaning plant, tapping connection INOX V4A, with ball valve, for connection of spring-coiled hose reel or spray equipments with pipeline system

Order-number: 710.000.387

Details »

HP cleaning plant, tapping connection, pivoted joint

HP cleaning plant, tapping connection, pivoted joint

HP cleaning plant, tapping connection, pivoted joint, pivoting hose connection for spring-coiled hose reel or spray equipment

Order-number: 710.000.388

Details »

HP cleaning plant, VARIO-Injector 1.8 mm with connector

HP cleaning plant, VARIO-Injector 1.8 mm with connector

HP cleaning plant, VARIO-Injector 1.8 mm / 0.07 in with connector, feeds detergent under low pressure behind the high pressure pump into the high pressure water stream thus sparing the pump, adjustable admix rate 1 - 10 %

Order-number: 710.306.042

Details »

HP cleaning plant, VARIO-Injector 2.1 mm with connector

HP cleaning plant, VARIO-Injector 2.1 mm with connector

HP cleaning plant, VARIO Injector 2.1 mm / 0.08 in with connector, feeds detergent under low pressure behind the high pressure pump into the high pressure water stream thus sparing the pump, adjustable admix rate 1 - 10 %

Order-number: 710.306.043

Details »

HP cleaning plant, VARIO-Injector 2.1 mm with connector, INOX

HP cleaning plant, VARIO-Injector 2.1 mm with connector, INOX

HP cleaning plant, VARIO Injector 2.1 mm / 0.08 in with connector, INOX, feeds detergent under low pressure behind the high pressure pump into the high pressure water stream thus sparing the pump, adjustable admix rate 1 - 10 %

Order-number: 710.306.047

Details »

HP cleaning plant, wall holder for hp hose

HP cleaning plant, wall holder for hp hose

HP cleaning plant, wall holder for hp hose, Aluminium, lacquer coated

Order-number: 710.702.050

Details »

HP cleaning plant, wall hook for hp pistol INOX

HP cleaning plant, wall hook for hp pistol INOX

HP cleaning plant, wall hook, INOX, for high pressure pistol

Order-number: 710.702.053

Details »

Floor cleaning device BRW 350 VA

Floor cleaning device BRW 350 VA

BRW 350 VA floor cleaning device, INOX, for high pressure cleaning of slip-free floors and other traffic areas - removal of oil, working pressure max. 250 bar / 3625 psi, water temperature max. 150°C / 302°F, working width 350 mm / 14 in, rotary nozzle elements, easy coupling to hp cleaner

Order-number: 710.800.370

Details »

Floor cleaning device BRW 470 VA

Floor cleaning device BRW 470 VA

BRW 470 VA floor cleaning device, INOX, for slip-free floors and other traffic areas, removal of oil from floors, max. 250 bar / 3625 psi, hot water max. 90°C / 194°F, working width 470 mm / 18 in, rotary nozzle elements for high surface cleaning capacity, easy coupling to hp cleaner

Order-number: 710.800.847

Details »

Floor cleaning device BRW 530 VA

Floor cleaning device BRW 530 VA

BRW 530 VA floor cleaning device, INOX, for slip-free floors and other traffic areas, removal of oil from floors, max. 500 bar / 7250 psi, hot water max. 90°C / 194°F, working width 500 mm / 19 in, rotary nozzle elements for high surface cleaning capacity, easy coupling to hp cleaner

Order-number: 710.800.820

Details »

Floor cleaning device BRW 550 Ex VA explosion proof

Floor cleaning device BRW 550 Ex VA explosion proof

BRW 550 Ex VA floor cleaning device, INOX, for use in explosion endangered areas, for slip-free floors and other traffic areas in explosion-risk zones, for oil removal from floors, max. 500 bar / 7250 psi, max. 90°C / 194°F hot water, working width 500 mm / 19 in, rotating nozzle elements, high surface cleaning capacity, easy coupling to explosion proof hp cleaner

Order-number: 710.800.890

Details »

Floor cleaning device TRG 508 VA

Floor cleaning device TRG 508 VA

TRG 508 VA floor cleaning device made of stainless steel, for slip-free floors and other traffic areas, e. g. jagged and uneven surfaces such as grids et al., max. 500 bar / 7250 psi, max 90°C / 194°F hot water, working width 500 mm / 19 in, rotating nozzle elements, high surface cleaning capacity, easy coupling to hp cleaner

Order-number: 710.800.891

Details »

Fluid softener anti scale, 1 l

Fluid softener anti scale, 1 l

Fluid softener anti scale 1 l / 0.3 gal, for all OERTZEN hot water hp cleaners

Order-number: 710.730.029

Details »

Food Industry HP hose 5 m

Food Industry HP hose 5 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 5 m / 16 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.124

Details »

Food Industry HP hose 10 m

Food Industry HP hose 10 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 10 m / 33 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.057

Details »

Food Industry HP hose 15 m

Food Industry HP hose 15 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 15 m / 49 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.058

Details »

Food Industry HP hose 20 m

Food Industry HP hose 20 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 20 m / 66 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.059

Details »

Food Industry HP hose 30 m

Food Industry HP hose 30 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 30 m / 98 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.044

Details »

Food Industry HP hose 40 m

Food Industry HP hose 40 m

Food Industry high pressure hose, 3/8", ND 8, 210 bar / 3045 psi, 150°C / 302°F max., 40 m / 131 ft

developed especially for hp cleaning in food industry - leaves no traces on floors and walls

Order-number: 710.702.089

Details »

Foot valve 500 bar

Foot valve 500 bar

Foot valve 500 bar / 7250 psi, for OERTZEN stationary high pressure cleaners or high pressure drain cleaning with 500 bar / 7250 psi

Order-number: 710.704.870

Details »

Foot valve 1000 bar

Foot valve 1000 bar

Foot valve 1000 bar / 14500 psi, for OERTZEN stationary high pressure cleaners or high pressure drain cleaning with 1000 bar / 14500 psi

Order-number: 751.400.868

Details »

Front metal sheet long version E 240/E 320 INOX

Front metal sheet long version E 240/E 320 INOX

Front metal sheet, long, INOX, for E 240/E 320 INOX versions, e.g. for mounting of hose reels

Order-number: 710.000.597

Details »

Front metal sheet long version E 500-30

Front metal sheet long version E 500-30

Front metal sheet, long, for E 500-30, e. g. for mounting of hose reels

Order-number: 710.000.598

Details »

Fuel container

Fuel container

Fuel container (NATO canister) 20 l / 5.3 gal, steel, lacquer coated

Order-number: 710.601.125

Details »

GEKA coupling 3/4"

GEKA coupling 3/4"

GEKA coupling, brass, 3/4"i, for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses

Order-number: 710.703.081

Details »

GEKA suction coupling 3/4"

GEKA suction coupling 3/4"

GEKA suction coupling 3/4", ensures air tight connection of water hoses, for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses

Order-number: 710.703.060

Details »

GEKA nozzle 3/4''

GEKA nozzle 3/4''

GEKA nozzle, brass, 3/4"SL, for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses

Order-number: 710.703.091

Details »

GEKA nozzle 1"

GEKA nozzle 1"

GEKA nozzle 1", brass, for connection of water hoses with high pressure cleaners or hydro extraction vacs, and also for extending water hoses

Order-number: 710.703.092

Details »

High pressure lance 500 bar INOX 500 mm

High pressure lance 500 bar INOX 500 mm

High pressure lance 1/2 ", 500 bar / 7250 psi, INOX, length 500 mm / 19 in, no-tool coupling

Order-number: 710.704.951

Details »

High pressure lance 500 bar INOX 800 mm

High pressure lance 500 bar INOX 800 mm

High pressure lance 500 bar / 7250 psi INOX, length 800 mm / 31 in, with side support handle, no-tool coupling


Order-number: 710.704.952

Details »

High pressure lance 500 bar INOX 1000 mm

High pressure lance 500 bar INOX 1000 mm

High pressure lance 500 bar / 7250 psi INOX, length 1000 mm / 39 in, with side support handle, no-tool coupling


Order-number: 710.704.953

Details »

High pressure lance 500 bar INOX 1500 mm

High pressure lance 500 bar INOX 1500 mm

High pressure lance 500 bar / 7250 psi INOX, length 1500 mm / 58 in, with side support handle, no- tool coupling

Order-number: 710.704.905

Details »

High pressure lance 500 bar INOX 2000 mm

High pressure lance 500 bar INOX 2000 mm

High pressure lance 1/2", 500 bar / 7250 psi, INOX, length 2000 mm / 78 in, no-tool coupling

Order-number: 710.704.970

Details »

Hose clamp 20-32 mm INOX

Hose clamp 20-32 mm INOX

Hose clamp 20 - 32 mm / 0.8 - 1.2 in, INOX, for water hoses with 3/4" internal diametre

Order-number: 710.703.011

Details »

Hose clamp 32-50 mm INOX

Hose clamp 32-50 mm INOX

Hose clamp 32 - 50 mm / 1.2 - 1.9 in, INOX, for water hoses with 1" internal diametre

Order-number: 710.703.013

Details »

Hose reel 300 bar 30 m

Hose reel 300 bar 30 m

Hose reel 300 bar 30 m, e.g. to be mounted on front metal sheet of hp cleaner with up to 300 bar / 4350 psi working power, for 30 m / 98 ft PANZERJET high pressure hose, or 60 m / 197 ft JET high pressure hose, high quality swivel, reel made of coated steel

Order-number: 710.800.769

Details »

Hose reel 500 bar 60 m

Hose reel 500 bar 60 m

Hose reel 500 bar 60 m, e.g. to be mounted on front metal sheet of hp cleaner with up to 500 bar / 7250 psi working power, for 60 m / 197 ft PANZERJET high pressure hose, high quality swivel, reel made of coated steel

Order-number: 710.000.791

Details »

Hose reel spring-biased, steel 20 m

Hose reel spring-biased, steel 20 m

Hose reel spring-biased, steel, powder-coated, 250 bar / 3625 psi max., for 20 m / 66 ft high pressure hose, high quality swivel joint, wall mounting

Option: hinged wall mounting 710.800.783

Order-number: 710.800.782

Details »

Hose reel spring-biased, INOX 20 m

Hose reel spring-biased, INOX 20 m

Hose reel spring-biased, INOX, 250 bar / 3625 psi max., for 20 m / 66 ft high pressure hose, high quality swivel joint, wall mounting

Option: hinged wall mounting 710.800.787

Order-number: 710.800.786

Details »

Hose reel spring-biased, INOX 40 m

Hose reel spring-biased, INOX 40 m

Hose reel spring-biased, INOX, 250 bar / 3625 psi max., for 40 m / 131 ft high pressure hose, high quality swivel joint, wall mounting

Option: hinged wall mounting 710.800.785

Order-number: 710.800.784

Details »

Hose reel spring-biased, INOX 20 m Ex

Hose reel spring-biased, INOX 20 m Ex

Hose reel spring-biased, INOX, Ex, 250 bar / 3625 psi max., for explosion endangered areas, for 20 m / 66 ft high pressure hose, wall mounting

Option: hinged wall mounting 710.800.787

Order-number: 710.800.779

Details »

Hose reel spring-biased, INOX 40 m Ex

Hose reel spring-biased, INOX 40 m Ex

Hose reel spring-biased, INOX, Ex, 250 bar / 3625 psi max., for explosion endangered areas, for 40 m / 131 in high pressure hose, wall mounting

Option: hinged wall mounting 710.800.785

Order-number: 710.800.761

Details »

Hose reel hinged wall mounting, steel 20 m

Hose reel hinged wall mounting, steel 20 m

Hinged wall mounting, steel, for spring-biased hose reel 20 m / 66 ft item no. 710.800.782

Order-number: 710.800.783

Details »

Hose reel hinged wall mounting, INOX 20 m

Hose reel hinged wall mounting, INOX 20 m

Hinged wall mounting, INOX, for spring-biased hose reel 20 m / 66 ft item no. 710.800.786

Order-number: 710.800.787

Details »

Hose reel hinged wall mounting, INOX 40 m

Hose reel hinged wall mounting, INOX 40 m

Hinged wall mounting, INOX, for spring-biased hose reel 40 m / 131 ft item no. 710.800.784

Order-number: 710.800.785

Details »

Hose reel, portable 20 m

Hose reel, portable 20 m

Hose reel for 20 m / 66 ft high pressure hose, plastic, with metal handle, portable

pic. shows optional PANZERJET high pressure hose

Order-number: 710.800.777

Details »

Hose reel trolley 500 bar

Hose reel trolley 500 bar

Hose reel trolley 500 bar, for high pressure hose 500 bar / 7250 psi, max. 60 m / 197 ft - delivery without hose - please order additionally:

PANZERJET HP security hose 500 bar / 7250 psi, length 60 m / 197 ft, 710.702.080

Order-number: 710.000.809

Details »

Hose reel attachment kit for to wheel barrow 312 Profi

Hose reel attachment kit for to wheel barrow 312 Profi

Attachment kit for hose reel No. 710.800.769 to wheel barrow for OERTZEN cold water hp cleaner 312/314 Profi

Order-number: 710.000.767

Details »

Hose reel with add-on set for 312/314 Profi

Hose reel with add-on set for 312/314 Profi

Hose reel 250 bar, plastic, for 20 m / 66 ft high pressure hose - only in connection with wheel barrow 710.000.193 for OERTZEN cold water hp cleaner 312/314 Profi

Order-number: 710.000.194

Details »

Hose reel with add-on set for Highpower

Hose reel with add-on set for Highpower

Hose reel 20 m / 66 ft, plastic, add-on set for OERTZEN Highpower

Order-number: 710.000.180

Details »

Hose reel with add-on set for Superpower

Hose reel with add-on set for Superpower

Hose reel 20 m / 66 ft, plastic, add-on set for OERTZEN Superpower

Order-number: 710.000.182

Details »

Hose reel with add-on set for Trendpower

Hose reel with add-on set for Trendpower

Hose reel 20 m / 66 ft, plastic, add-on set for OERTZEN Trendpower

Order-number: 710.000.181

Details »

Hose reel with add-on set for SM 220

Hose reel with add-on set for SM 220

Hose reel 20 m / 66 ft, plastic, add-on set for OERTZEN SuperMagnum 220

Order-number: 710.000.187

Details »

Hose swivel 1/4" 300 bar brass

Hose swivel 1/4" 300 bar brass

Hose swivel 1/4", 300 bar / 4350 psi, brass, mounted between pistol and hose, prevents coiling up of hose

Order-number: 710.708.057

Details »

Hose swivel 3/8" 330 bar brass

Hose swivel 3/8" 330 bar brass

Hose swivel 3/8", 330 bar / 4785 psi, brass, mounted between pistol and hose, prevents coiling-up of hose

Order-number: 710.708.050

Details »

Hose swivel 3/8" 500 bar INOX

Hose swivel 3/8" 500 bar INOX

Hose swivel 3/8", 500 bar / 7250 psi, INOX, mounted between pistol and hose, prevents coiling up of hose

Order-number: 710.708.054

Details »

HOT BOX 200 heater module

HOT BOX 200 heater module

Mobile hot water module, 230 V, for coupling to cold water hp cleaner, 250 bar / 3625 psi max., water temperature 130°C / 266°F, flow rate 1380 l/h / 364 gal/h, serially equipped with 2 m / 6 ft PANZERJET hp hose, 4 m / 13 ft electric cable with shock-proof plug

Order-number: 710.000.092

Details »

HOT BOX 500 heater module

HOT BOX 500 heater module

Mobile hot water module, 230 V, for coupling to cold water hp cleaner, max. 500 bar / 7250 psi, water temperature 130°C / 266°F, flow rate 1380 l/h / 364 gal/h, serially equipped with 2 m / 6 ft PANZERJET hp hose, 4 m / 13 ft electric cable with shock-proof plug

Order-number: 710.000.094

Details »

HOT BOX flow divider

HOT BOX flow divider

Flow divider for simultaneous use of 2 HOT BOXES - divides amount of water delivered by hp cleaning unit between 2 HOT BOXES

Order-number: 710.000.066

Details »

PPE Arm protection garment

PPE Arm protection garment

PPE Arm protection garment, part of Personal Protective Equipment (PPE), protective clothing for high pressure cleaning, protection class 10/28: point jet 1000 bar / 14500 psi, rotor jet 2800 bar / 40600 psi, CE 89/686/EWG

Order-number: 755.000.061

Details »

PPE Apron body protection

PPE Apron body protection

PPE Apron body protection, part of Personal Protective Equipment (PPE), protective clothing for high pressure cleaning, protection class 10/28: point jet 1000 bar / 14500 psi, rotor jet 2800 bar / 40600 psi, CE 89/686/EWG

Order-number: 751.600.648

Details »

PPE Gaiters body protection

PPE Gaiters body protection

PPE Gaiters body protection, part of Personal Protective Equipment (PPE), protective clothing for high pressure cleaning, protection class 10/28: point jet 1000 bar / 14500 psi, rotor jet 2800 bar / 40600 psi, CE 89/686/EWG

Order-number: 755.000.052

Details »

PPE Hand gloves

PPE Hand gloves

PPE Hand gloves, part of Personal Protective Equipment (PPE), protective clothing for high pressure cleaning, cut -resistant glove with protective cuff, material: Nylon/Dyneema/fibreglass, protection: point jet 200 bar / 2900 psi - rotor jet 500 bar / 7250 psi, colour: grey/black, two-parts with inner glove, washable at 40°C / 104°F, size 11

Order-number: 755.000.072

Details »

PPE Safety boots

PPE Safety boots

PPE Safety boots, part ofPersonal Protective Equipment (PPE), for high pressure cleaning up to 800 bar / 11600 psi, EN ISO 20345, with steel toe-cap and sole, reinforced model for protection of tibia, malleolus and heel - shock absorbing, antistatic sole - please indicate size

Caution: If working pressure exeeds 800 bar / 11600 psi, be sure to wear protective gaiters (755.000.052)!

Order-number: 751.600.592

Details »

HP safety pistol 310 bar

HP safety pistol 310 bar

High pressure safety pistol, 310 bar / 4495 psi, ergonomic design, best heat insulation, casing made of Makrolon (fibre-glass reinforced, shock-resistant), can belocked in closed position

Order-number: 710.700.003

Details »

HP safety pistol 330 bar

HP safety pistol 330 bar

High pressure safety pistol, 330 bar / 4785 psi, servo assistant, ergonomic design, best heat insulation, casing made of Makrolon (fibre-glass reinforced, shock-resistant), can be locked in closed position

Order-number: 710.700.001

Details »

HP safety pistol 500 bar INOX (servo)

HP safety pistol 500 bar INOX (servo)

High pressure safety pistol, 500 bar / 7250 psi, INOX, servo assistance, ergonomic design, best heat insulation, casing made of Makrolon (fibre-glass reinforced, shock-resistant), can be locked in closed position

Order-number: 710.704.940

Details »

Initial current limiter

Initial current limiter

Initial current limiter 230V/50Hz, prevents triggering of fast fuses when starting electric motor of high pressure cleaner

Order-number: 710.000.879

Details »

JET HP hose 10 m

JET HP hose 10 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 10 m / 33 ft, ISO

Order-number: 710.702.067

Details »

JET HP hose 15 m

JET HP hose 15 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 15 m / 49 ft, ISO

Order-number: 710.702.054

Details »

JET HP hose 20 m

JET HP hose 20 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 20 m / 66 ft, ISO

Order-number: 710.702.055

Details »

JET HP hose 30 m

JET HP hose 30 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 30 m / 98 ft, ISO

Order-number: 710.702.069

Details »

JET HP hose 40 m

JET HP hose 40 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 40 m / 131 ft, ISO

Order-number: 710.702.114

Details »

JET HP hose 50 m

JET HP hose 50 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 50 m / 164 ft, ISO

Order-number: 710.702.200

Details »

JET HP hose 60 m

JET HP hose 60 m

JET high pressure safety hose, 1/4", nominal diameter 8, max. 300 bar / 4350 psi, 150°C / 302°F, 60 m / 197 ft, ISO

Order-number: 710.702.201

Details »

Low-rate injector for detergent

Low-rate injector for detergent

Low-rate injector feeds detergent with low pressure behind hp pump into hp water stream, saving detergent with long lengths of hose

Order-number: 710.306.060

Details »

MAXIJET HP Hose 20 m

MAXIJET HP Hose 20 m

MAXIJET high pressure safety hose, 3/8", 20 m / 66 ft, super smooth and non-abrasive, nominal diameter 10, max. 500 bar / 7250 psi, 150°C / 302°F; other lengths on request

Order-number: 710.702.235

Details »

MEDIJET HP Hose 20 m

MEDIJET HP Hose 20 m

MEDIJET high pressure safety hose, 3/8", 20 m / 66 ft, super smooth and non-abrasive, nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F; other lengths on request

Order-number: 710.702.148

Details »

Modification kit hot water 78 °C

Modification kit hot water 78 °C

Modification kit hot water 78°C / 172°F (E 200-240) hot water sleeve kit for high pressure pump, e.g. for feeding of hot water with maximum 78°C / 172°F to be provided by customer

Order-number: 710.000.325

Details »

MONSUN 035

MONSUN 035

MONSUN 035, small-area water-sandblaster, for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, for most effective blasting with lowest possible consumption of blasting agent, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.267

Details »

MONSUN 045

MONSUN 045

MONSUN 045, small-area water-sandblaster, for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, for most effective blasting with lowest possible consumption of blasting agent, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.269

Details »

MONSUN 050

MONSUN 050

MONSUN 050, small-area water-sandblaster, for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, for most effective blasting with lowest possible consumption of blasting agent, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.275

Details »

MONSUN  055

MONSUN 055

MONSUN 055, small-area water-sandblaster, for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, for most effective blasting with lowest possible consumption of blasting agent, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.270

Details »

MONSUN 065

MONSUN 065

MONSUN 065, small-area water-sandblaster, for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, for most effective blasting with lowest possible consumption of blasting agent, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.277

Details »

MONSUN VARIO 040

MONSUN VARIO 040

MONSUN VARIO 040, surface-protective granulate blasting system for all sensitive natural and artifical stone surfaces, pressure range 5 - 250 bar / 72 - 3625 psi, variable adjustment of blasting pressure, water flow and granulate consumption directly at the pistol, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.285

Details »

MONSUN VARIO 055

MONSUN VARIO 055

MONSUN VARIO 055, surface-protective granulate blasting system for all sensitive natural and artifical stone surfaces, pressure range 5 - 250 bar / 72 - 3625 psi, variable adjustment of blasting pressure, water flow and granulate consumption directly at the pistol, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.286

Details »

MONSUN VARIO 065

MONSUN VARIO 065

MONSUN VARIO 065, surface-protective granulate blasting system for all sensitive natural and artifical stone surfaces, pressure range 5 - 250 bar / 72 - 3625 psi, variable adjustment of blasting pressure, water flow and granulate consumption directly at the pistol, with 10 m / 33 ft suction hose and duplex suction pipe for blasting agent

Order-number: 710.800.287

Details »

OSM OERTZEN Special Motor Oil, 5 liter

OSM OERTZEN Special Motor Oil, 5 liter

OSM OERTZEN Special Motor Oil, 5 l / 1.3 gal canister, for heavyly stressed gasoline/diesel engines of OERTZEN high pressure aggregates, application in accordance with specific needs of engine as referred to in the manual

use OSM OERTZEN Special Motor Oil only

Order-number: 710.802.005

Details »

OSM OERTZEN Special Motor Oil, 1 liter

OSM OERTZEN Special Motor Oil, 1 liter

OSM OERTZEN Special Motor Oil, 1 l / 0.26 gal canister, for heavyly stressed gasoline/diesel engines of OERTZEN high pressure aggregates, application in accordance with specific needs of engine as referred to in the manual

use OSM OERTZEN Special Motor Oil only

Order-number: 710.801.098

Details »

OSP OERTZEN Special Hypoid Pump Oil, 5 liter

OSP OERTZEN Special Hypoid Pump Oil, 5 liter

OSP OERTZEN Special Hypoid Pump Oil, 5 l / 1.3 gal canister, for OERTZEN high pressure inline pumps, first oil change after 50 working hours, all further oil changes after 500 working hours respectively at least once a year

use OSP OERTZEN Special Hypoid Pump Oil only

Order-number: 710.802.003

Details »

OSP OERTZEN Special Hypoid Pump Oil, 1 liter

OSP OERTZEN Special Hypoid Pump Oil, 1 liter

OSP OERTZEN Special Hypoid Pump Oil, 1 l / 0.26 gal canister, for OERTZEN high pressure inline pumps, first oil change after 50 working hours, all further oil changes after 500 working hours respectively at least once a year

use OSP OERTZEN Special Hypoid Pump Oil only

Order-number: 710.801.099

Details »

OSX OERTZEN Axial Piston Pump Oil

OSX OERTZEN Axial Piston Pump Oil

OSX OERTZEN Axial Piston Pump Oil, 1 l / 0.26 gal canister, for OERTZEN high pressure axial piston pumps, first oil change after 50 working hours, all further oil changes after 500 working hours respectively at least once a year

use OSX OERTZEN Axial Piston Pump Oil only

Order-number: 710.802.008

Details »

PANZERJET HP hose 2 m

PANZERJET HP hose 2 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 2 m / 6.6 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.079

Details »

PANZERJET HP hose 4 m

PANZERJET HP hose 4 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 4 m / 13 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.078

Details »

PANZERJET HP hose 10 m

PANZERJET HP hose 10 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 10 m / 33 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.064

Details »

PANZERJET HP hose 15 m

PANZERJET HP hose 15 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 15 m / 49 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.065

Details »

PANZERJET HP hose 20 m

PANZERJET HP hose 20 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 20 m / 66 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.066

Details »

PANZERJET HP hose 25 m

PANZERJET HP hose 25 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 25 m / 82 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.099

Details »

PANZERJET HP hose 30 m

PANZERJET HP hose 30 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 30 m / 98 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.074

Details »

PANZERJET HP hose 40 m

PANZERJET HP hose 40 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 40 m / 131 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.076

Details »

PANZERJET HP hose 50 m

PANZERJET HP hose 50 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 50 m / 164 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.077

Details »

PANZERJET HP hose 60 m

PANZERJET HP hose 60 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 60 m / 197 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.080

Details »

PANZERJET HP hose 100 m

PANZERJET HP hose 100 m

PANZERJET high pressure safety hose, 3/8", nominal diameter 8, max. 500 bar / 7250 psi, 150°C / 302°F, length 100 m / 328 ft

Option: Ex design for operation in explosion endangered areas

Order-number: 710.702.082

Details »

Pressure test device 30 - 250 bar

Pressure test device 30 - 250 bar

Pressure test device 30 - 250 bar / 435 - 3625 psi, for pressure testing of pipe lines

Order-number: 710.000.883

Details »

PVC hose

PVC hose

Suction hose for sand blasting agent made of PVC, fabric-mesh reinforced, diametre 13 mm / 0.5 in, sold by the meter

Order-number: 710.701.003

Details »

Quick coupling nipple 3/8" INOX

Quick coupling nipple 3/8" INOX

Quick coupling nipple 3/8" INOX, tempered, fits quick coupling 3/8" INOX i, 500 bar / 7250 psi, 710.708.045

Order-number: 710.708.046

Details »

Quick coupling 3/8" INOX

Quick coupling 3/8" INOX

Quick coupling 3/8" i INOX, 500 bar / 7250 psi

Order-number: 710.708.045

Details »

Quick coupling nipple 1/4" INOX

Quick coupling nipple 1/4" INOX

Quick coupling nipple 1/4" i INOX, tempered, fits quick coupling 1/4" VA i, 500 bar / 7250 psi,710.708.040

Order-number: 710.708.041

Details »

Quick coupling 1/4" INOX

Quick coupling 1/4" INOX

Quick coupling 1/4"a INOX, 500 bar / 7250 psi

Order-number: 710.708.040

Details »

Reducing fitting socket

Reducing fitting socket

Reducing fitting socket 3-8"Wx1-4"M ST

Order-number: 710.002.090

Details »

Rotor brush

Rotor brush

Rotor brush, rotating by water pressure for easy cleaning of smooth surfaces, in connection with spray lance extensions (300 - 1500 mm / 12 - 58 in)

Order-number: 710.800.010

Details »

Sand container

Sand container

Container for sand/blasting agent, 80 l / 21 gal, with sand suction group, mobile

Order-number: 710.800.350

Details »

Scaffolding tie strap for hose

Scaffolding tie strap for hose

Scaffolding tie strap for hose, for securing and guiding of high pressure hose with sanding or cleaning works at scaffolded objects

Order-number: 710.800.399

Details »

SCS Control E 200/E 240

SCS Control E 200/E 240

Safety Control Stop SCS machine safety item for E 200/E 240, prevents overheating of high pressure pump in stand-by operation by cutting off machine electrically

Order-number: 710.000.705

Details »

SCS Control E 320

SCS Control E 320

Safety Control Stop SCS machine safety item for E 320, prevents overheating of high pressure pump in stand-by operation by cutting off machine electrically

Order-number: 710.000.703

Details »

SCS Control E 400

SCS Control E 400

Safety Control Stop SCS machine safety item for E 400, prevents overheating of high pressure pump in stand-by operation by cutting off machine electrically

Order-number: 710.000.704

Details »

SCS Control E 500-30

SCS Control E 500-30

Safety Control Stop SCS machine safety item for E 500-30, prevents overheating of high pressure pump in stand-by operation by cutting off machine electrically

Order-number: 710.000.702

Details »

Sludge pump

Sludge pump

Pumping divice for sludge and fluids according to Venturi principle (partial vacuum) up to a height of 5 m / 16 ft, just to be coupled to hp cleaner, pumps up everything completely, suction hose diametre 1 1/2", length of hose 3.5 m / 11.5 in

Order-number: 710.800.410

Details »

SOOPERJET arrester cable for hose

SOOPERJET arrester cable for hose

Arrester cable for SOOPERJET hose for OERTZEN cold water ultra high pressure aggregates D / E 1000 with 1000 bar / 14500 psi

Order-number: 751.400.852

Details »

SOOPERJET coupling nipple 1000 bar

SOOPERJET coupling nipple 1000 bar

Coupling nipple 1000 bar / 14500 psi SOOPERJET hose for OERTZEN ultra high pressure aggregates D/E 1000

Order-number: 750.500.375

Details »

SOOPERJET ultra high pressure hose 20 m

SOOPERJET ultra high pressure hose 20 m

SOOPERJET ultra high pressure hose, 1250 bar / 18125 psi max., ND 10, 20 m / 66 ft

Order-number: 751.400.776

Details »

Spray lance extension 300 mm

Spray lance extension 300 mm

Spray lance extension, no-tool coupling, INOX, 300 mm / 11 in (without nozzle)

Order-number: 710.704.120

Details »

Spray lance extension 600 mm

Spray lance extension 600 mm

Spray lance extension, no-tool coupling, INOX, 600 mm / 23 in (without nozzle)

Order-number: 710.704.125

Details »

Spray lance extension 800 mm

Spray lance extension 800 mm

Spray lance extension, no-tool coupling, INOX, 800 mm / 31 in (without nozzle)

Order-number: 710.704.121

Details »

Spray lance extension 1200 mm

Spray lance extension 1200 mm

Spray lance extension, no-tool coupling, INOX, 1200 mm / 47 in (without nozzle)

Order-number: 710.704.122

Details »

Spray lance extension 1500 mm

Spray lance extension 1500 mm

Spray lance extension, no-tool coupling, INOX, 1500 mm / 58 in (without nozzle)

Order-number: 710.704.123

Details »

Spray lance/washing lance 600 mm

Spray lance/washing lance 600 mm

Spraying / washing lance, stainless steel, 400 bar / 5800 psi, length 600 mm / 23 in, no-tool coupling, incl. nozzle attachment and nozzle protector, without nozzle

Order-number: 710.700.030

Details »

Spray lance/washing lance 800 mm

Spray lance/washing lance 800 mm

Spraying / washing lance, stainless steel, 400 bar / 5800 psi, length 800 mm / 31 in, no-tool coupling, incl. nozzle attachment and nozzle protector, without nozzle

Order-number: 710.700.031

Details »

Spray lance/washing lance 1200 mm

Spray lance/washing lance 1200 mm

Spraying / washing lance, stainless steel, 400 bar / 5800 psi, length 1200 mm / 47 in, no-tool coupling, incl. nozzle attachment and nozzle protector, without nozzle

Order-number: 710.700.032

Details »

Spray lance/washing lance 1500 mm

Spray lance/washing lance 1500 mm

Spraying / washing lance, stainless steel, 400 bar / 5800 psi max., length 1500 mm / 58 in, no-tool coupling, incl. nozzle attachment and nozzle protector, without nozzle

Order-number: 710.700.033

Details »

Suction fitting for water-sand blasting

Suction fitting for water-sand blasting

Suction fittings for water-sand blasting agents, wear part, connects water-sand blasting nozzle with PVC hose to container for blasting agent

Order-number: 710.800.261

Details »

Support for HP pistol 500 bar

Support for HP pistol 500 bar

Adjustable support with telescopic bar, quick coupling und shoulder rest
for high pressure safety pistol 500 bar / 7250 psi, INOX (servo) 710.704.940

Foto shows adjustable support connected to high pressure pistol 500 bar / 7250 psi

Order-number: 710.704.915

Details »

Support handle 330 bar lance, 1/4" connection

Support handle 330 bar lance, 1/4" connection

Support handle 330 bar / 4785 psi lance, 1/4" connection

Order-number: 710.704.124

Details »

Support handle 500 bar lance, 1/2" connection

Support handle 500 bar lance, 1/2" connection

Support handle 500 bar / 7250 psi lance, 1/2" connection

Order-number: 710.704.907

Details »

Support handle for 500 bar lances

Support handle for 500 bar lances

Support handle for 500 bar / 7250 psi lances

Order-number: 710.704.965

Details »

TIR internal tank cleaner aquamotor

TIR internal tank cleaner aquamotor

TIR aquamotor, INOX, incl. 2 nozzles, three-dimensionally working internal tank cleaner with water motor

Order-number: 710.800.521

Details »

TIR internal tank cleaner vacuum proof INOX 500 mm

TIR internal tank cleaner vacuum proof INOX 500 mm

TIR internal tank cleaner with electric motor drive 230V/1~50 Hz, vacuum proof, rotating 2 nozzle spray head cleaning inside of containers from 200 - 6000 l / 53 - 1584 gal, working power max. 200 bar / 2900 psi, water temperature max. 100°C / 212°F, inlet opening min. 50 mm / 2 in, shaft made of INOX, length 500 mm / 19 in - to be coupled to stationary or mobile high pressure cleaners

Extra versions on request: e.g. driven by low voltage or compressed air motor (EX safe for use in explosion endangered areas), 4 nozzle spray head, water temperature 150°C / 302°F, shaft stainless steel V2A / V4A, also vacuum proof, immersion lengths 500 - 4000 mm / 19 - 156 in, extra holders for various tank inlet opening

Order-number: 710.800.503

Details »

TIR internal tank cleaner vacuum proof INOX 1000 mm

TIR internal tank cleaner vacuum proof INOX 1000 mm

TIR internal tank cleaner with electric motor drive 230V/1~50 Hz, vacuum proof, rotating 2 nozzle spray head cleaning inside of containers from 200 - 6000 l / 53 - 1584 gal, working power max. 200 bar / 2900 psi, water temperature max. 100°C / 212°F, inlet opening min. 50 mm / 2 in, shaft made of INOX, length 1000 mm / 39 in - to be coupled to stationary or mobile high pressure cleaners

Extra versions on request: e.g. driven by low voltage or compressed air motor (EX safe for use in explosion endangered areas), 4 nozzle spray head, water temperature 150°C / 302°F, shaft stainless steel V2A / V4A, also vacuum proof, immersion lengths 500 - 4000 mm / 19 - 156 in, extra holders for various tank inlet opening

Order-number: 710.800.504

Details »

TIR internal tank cleaner INOX explosion proof (EEx) Atl.Copco 1000 mm

TIR internal tank cleaner INOX explosion proof (EEx) Atl.Copco 1000 mm

TIR internal tank cleaner with compressed air motor, explosion proof, rotating 2 nozzle spray head cleaning inside of containers from 200 - 6000 l / 53 - 1584 gal, working power max. 200 bar / 2900 psi, water temperature max. 100°C / 212°F, inlet opening min. 50 mm / 2 in, shaft made of INOX, length 1000 mm / 39 in - to be coupled to stationary or mobile high pressure cleaners

Extra versions on request: e.g. 4 nozzle spray head, water temperature 150°C / 302°F, shaft stainless steel V2A / V4A, immersion lengths 500 - 4000 mm / 19 - 156 in, extra holders for various tank inlet opening

Order-number: 710.800.507

Details »

TIR internal tank cleaner double handle

TIR internal tank cleaner double handle

TIR double handle used with internal tank cleaner / chromium plated

Order-number: 710.800.513

Details »

TIR internal tank cleaner flange

TIR internal tank cleaner flange

TIR flange used with internal tank cleaner, made of polyamide 60/90/120

Order-number: 710.800.510

Details »

TIR internal tank cleaner rubber tap hole fixture

TIR internal tank cleaner rubber tap hole fixture

TIR rubber tap hole fixture

Order-number: 710.800.512

Details »

TIR internal tank cleaner thread device

TIR internal tank cleaner thread device

TIR thread device M64-2"

Order-number: 710.800.511

Details »

TORNADO 035

TORNADO 035

TORNADO 035, large-area water sandblaster for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, with visor helmet, protective goggles, ear protection, mobile container for blasting agent, regulation for blasting agent, 10 m / 33 ft suction hose

Order-number: 710.800.303

Details »

TORNADO 05

TORNADO 05

TORNADO 05, large-area water sandblaster for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, with visor helmet, protective goggles, ear protection, mobile container for blasting agent, regulation for blasting agent, 10 m / 33 ft suction hose

Order-number: 710.800.300

Details »

TORNADO 06

TORNADO 06

TORNADO 06, large-area water sandblaster for abrasive surface treatment such as concrete repair, decoating, derusting, pressure range 100 - 500 bar / 1450 - 7250 psi, with visor helmet, protective goggles, ear protection, mobile container for blasting agent, regulation for blasting agent, 10 m / 33 ft suction hose

Order-number: 710.800.301

Details »

TORNADO protection helmet

TORNADO protection helmet

TORNADO protection helmet for water sandblasting, with wire mesh visor, ear protectors and protective goggles

Order-number: 710.800.352

Details »

TORNADO wire mesh visor for protection helmet

TORNADO wire mesh visor for protection helmet

TORNADO wire mesh visor for protection helmet

Order-number: 710.800.355

Details »

TORNADO plastic visor for protection helmet

TORNADO plastic visor for protection helmet

TORNADO plastic visor for protection helmet, optional, face protection, Polycarbonate, clear, 440 x 145 x 2 mm / 17.2 x 5.6 x 0.08 in
replaces standard TORNADO Wire Mesh Visor for TORNADO protection helmet

Order-number: 710.800.363

Details »

Transportation high pressure hose

Transportation high pressure hose

Transportation high pressure hose 50 m / 164 ft, nominal diameter 10, max. 400 bar / 5800 psi, 150°C / 302°F, avoids loss of pressure with long hose length

Order-number: 710.702.084

Details »

Turbo blaster 035 (150 bar) head

Turbo blaster 035 (150 bar) head

Turbo blaster 035 (150 bar) head, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 150 bar / 2175 psi working pressure

Order-number: 710.759.098

Details »

Turbo blaster 035 (150 bar) with lance

Turbo blaster 035 (150 bar) with lance

Turbo blaster 035 (150 bar) with lance, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 150 bar / 2175 psi working pressure

Order-number: 710.759.099

Details »

Turbo blaster 035 (200 bar) 22°

Turbo blaster 035 (200 bar) 22°

Turbo blaster 035 (200 bar) 22°, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 200 bar / 2900 psi working pressure

Order-number: 710.758.035

Details »

Turbo blaster 045 (200 bar) 22°

Turbo blaster 045 (200 bar) 22°

Turbo blaster 045 (200 bar) 22°, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 200 bar / 2900 psi working pressure

Order-number: 710.758.045

Details »

Turbo blaster 050 (200 bar) 22°

Turbo blaster 050 (200 bar) 22°

Turbo blaster 050 (200 bar) 22°, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 200 bar / 2900 psi working pressure

Order-number: 710.758.050

Details »

Turbo blaster 035 (400 bar)

Turbo blaster 035 (400 bar)

Turbo blaster 035 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure

Order-number: 710.756.035

Details »

Turbo blaster 045 (400 bar)

Turbo blaster 045 (400 bar)

Turbo blaster 045 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure

Order-number: 710.756.045

Details »

Turbo blaster 050 (400 bar)

Turbo blaster 050 (400 bar)

Turbo blaster 050 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure, recommended for OERTZEN cold water hp stationary aggregate S 334 H

Order-number: 710.756.050

Details »

Turbo blaster 055 (400 bar)

Turbo blaster 055 (400 bar)

Turbo blaster 055 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure

Order-number: 710.756.055

Details »

Turbo blaster 065 (400 bar)

Turbo blaster 065 (400 bar)

Turbo blaster 065 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure, recommended for OERTZEN cold water stationary hp aggregate S 323 VA-H

Order-number: 710.756.065

Details »

Turbo blaster 080 (400 bar)

Turbo blaster 080 (400 bar)

Turbo blaster 080 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure

Order-number: 710.756.080

Details »

Turbo blaster 100 (400 bar)

Turbo blaster 100 (400 bar)

Turbo blaster 100 (400 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 400 bar / 5800 psi working pressure

Order-number: 710.756.100

Details »

Turbo blaster 035 (500 bar) 20°

Turbo blaster 035 (500 bar) 20°

Turbo blaster 035 (500 bar) 20°, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 500 bar / 7250 psi working pressure

Order-number: 710.759.035

Details »

Turbo blaster 050 (500 bar)

Turbo blaster 050 (500 bar)

Turbo blaster 050 (500 bar), special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 500 bar / 7250 psi working pressure

Order-number: 710.759.050

Details »

Turbo blaster 055 (500 bar) 20°

Turbo blaster 055 (500 bar) 20°

Turbo blaster 055 (500 bar) 20°, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for high pressure cleaners up to 500 bar / 7250 psi working pressure

Order-number: 710.759.056

Details »

Turbo blaster 1000 bar

Turbo blaster 1000 bar

Turbo blaster 1000 bar / 14500 psi, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for OERTZEN ultra high pressure aggregates E 1000 (no later than Dec. 2018) and OERTZEN D 1000

please order additionaly: connecting nipple 755.500.049 for Turbo blaster 4x to Spray lance 1000 bar H 755.000.190 (extra equipment)

Order-number: 751.500.805

Details »

Turbo blaster 1000 bar (from Dez. 2018)

Turbo blaster 1000 bar (from Dez. 2018)

Turbo blaster 1000 bar / 14500 psi, special nozzle with rotating point jet to achieve high impact pressure together with high surface cleaning capacity, for OERTZEN ultra high pressure aggregates E 1000 (from Dec. 2018 on)

please order additionaly: connecting nipple 755.500.049 for Turbo blaster 4x to Spray lance 1000 bar H 755.000.190 (extra equipment)

Order-number: 751.500.855

Details »

Turbo blaster 4x, 1000 bar

Turbo blaster 4x, 1000 bar

Turbo blaster 4x, 1000 bar / 14500 psi, special nozzle with 4 rotating point jets to achieve high impact pressure and very good surface cleaning capacity,
for OERTZEN ultra high pressure aggregate E 1000 and D 1000

Order-number: 751.501.029

Details »

Turbo gully cleaner 50 mm

Turbo gully cleaner 50 mm

Turbo gully cleaner, 250 bar / 3625 psi, 50 mm / 2 in diametre

Order-number: 710.800.808

Details »

Turbo gully cleaner 50 mm 25°

Turbo gully cleaner 50 mm 25°

Turbo gully cleaner, 250 bar / 3625 psi, nozzle angle 25°, 50 mm / 2 in diametre

Order-number: 710.800.800

Details »

Turbo gully cleaner 75 mm

Turbo gully cleaner 75 mm

Turbo gully cleaner, 250 bar / 3625 psi, diametre 75 mm / 2.9 in

Order-number: 710.800.809

Details »

Turbo gully cleaner 75 mm 25°

Turbo gully cleaner 75 mm 25°

Turbo gully cleaner, 250 bar / 3625 psi, nozzle angle 25°, diametre 75 mm / 2.9 in

Order-number: 710.800.801

Details »

Turbo gully cleaner 150 mm

Turbo gully cleaner 150 mm

Turbo gully cleaner, 250 bar / 3625 psi, 150 mm / 5.8 in diametre

Order-number: 710.800.810

Details »

Turbo gully cleaner 150 mm 55°

Turbo gully cleaner 150 mm 55°

Turbo gully cleaner, 250 bar / 3625 psi, nozzle angle 55°, 150 mm / 5.8 in diametre

Order-number: 710.800.802

Details »

Turbo gully cleaner 300 mm

Turbo gully cleaner 300 mm

Turbo gully cleaner, 250 bar / 3625 psi, 300 mm / 11.7 in diametre

Order-number: 710.800.811

Details »

Turbo gully cleaner 300 mm 55°

Turbo gully cleaner 300 mm 55°

Turbo gully cleaner, 250 bar / 3625 psi, nozzle angle 55°, 300 mm / 11.7 in diametre

Order-number: 710.800.803

Details »

Turbo gully cleaner 580 VA

Turbo gully cleaner 580 VA

High pressure gully cleaner 580 mm / 22.6 in diameter, INOX, max. 400 bar / 5800 psi , rotating nozzle bar with 2 point jet nozzles - to be coupled to hp cleaner

Order-number: 710.007.141

Details »

Turbo nozzle spinner 300 mm

Turbo nozzle spinner 300 mm

Turbo nozzle spinner, rotating high pressure cleaning device with 300 mm / 11.7 in diametre for pits, chimneys, transport pipelines

Order-number: 710.800.813

Details »

Turbo nozzle spinner 400 mm

Turbo nozzle spinner 400 mm

Turbo nozzle spinner, rotating high pressure cleaning device with 400 mm / 15.6 in diametre for pits, chimneys, transport pipelines

Order-number: 710.800.814

Details »

Turbo nozzle spinner 500 mm

Turbo nozzle spinner 500 mm

Turbo nozzle spinner, rotating high pressure cleaning device with 500 mm / 19.5 in diametre for pits, chimneys, transport pipelines

Order-number: 710.800.815

Details »

Turbo nozzle spinner 600 mm

Turbo nozzle spinner 600 mm

Turbo nozzle spinner, rotating high pressure cleaning device with 600 mm / 23.4 in diametre for pits, chimneys, transport pipelines

Order-number: 710.800.816

Details »

Turbo nozzle spinner 800 mm

Turbo nozzle spinner 800 mm

Turbo nozzle spinner, rotating high pressure cleaning device with 800 mm / 31 in diametre for pits, chimneys, transport pipelines

Order-number: 710.800.817

Details »

VacLav 1 bended lance, long

VacLav 1 bended lance, long


for high pressure cleaning of aircraft waste tank - espcially areas on bottom of tank, covered by hard residues

Order-number: 710.705.120

Details »

VacLav 1 bended lance, short, with pistol

VacLav 1 bended lance, short, with pistol

for high pressure cleaning of aircraft waste tank - especially areas at inlet diverter, not being cleaned by internal tank cleaner

Order-number: 710.705.119

Details »

VacLav 1 by-pass vacuum device

VacLav 1 by-pass vacuum device

for rinsing of clogged aircraft toilets - by-pass vacuum device is connected to functioning neighbor toilet using it´s vacuum for declogging

Order-number: 710.805.017

Details »

VacLav 1 expanding flange

VacLav 1 expanding flange

insert internal tank cleaner with expanding flange into opening of waste tank and secure by turning threaded nut of flange


Ill. shows VacLav 1expanding flange with internal tank cleaner

Order-number: 710.800.497

Details »

VacLav 1 flange adaptor A 320

VacLav 1 flange adaptor A 320

Airbus A 320 adaptor for internal tank cleaner expanding flange

Order-number: 710.800.498

Details »

VacLav 1 internal tank cleaner

VacLav 1 internal tank cleaner

VacLav 1 internal tank cleaner's task is cleaning aircraft waste tanks. This device has a turning nozzle head with 2 jets, sitting on the end of an INOX shaft, mounted to waste tank with a expanding flange. Driven by 24 V electric motor - a hp hose delivers hp water from VacLav 1 unit.

Ill. shows internal tank cleaner with expanding flange 710.800.497

Order-number: 710.800.499

Details »

VacLav 2 adaptor

VacLav 2 adaptor


VacLav 2 adaptor is connected to waste line of aircraft toilet.
On opposite side of adaptor a drain cleaning hose with special nozzle is inserted into aircraft waste line system.
Now a discharging waste hose is connected additionally to the conical end of this adaptor.

Order-number: 710.800.754

Details »

VacLav 2 boroscope

VacLav 2 boroscope

tube inspection camera for checking aircraft waste lines before and after descaling process, battery powered, cable length 20 m / 66 ft

Order-number: 710.800.757

Details »

VacLav 2 double blind socket

VacLav 2 double blind socket

for sealing waste tubes between waste tank and waste lines before descaling process begins

Order-number: 710.800.758

Details »

VacLav 2 hose and cable safety belt

VacLav 2 hose and cable safety belt

safety strap for secure handling of hoses and cables during work

Order-number: 710.800.398

Details »

VacLav 2 remote control

VacLav 2 remote control

for remote control of cleaning and discharging pumps during waste line descaling

Order-number: 710.800.755

Details »

VacLav 2 retro recoil nozzle

VacLav 2 retro recoil nozzle

VacLav 2 retro recoil nozzle removes crystalline residues (urine scale) powerful but damage-free from walls of waste lines.
This nozzle pulls itself forward through waste lines because of it's backward directed nozzle jets. It´s nozzle guiding spring on top supports that pull.

Order-number: 710.800.765

Details »

VacLav 2 working hose reel with counter A 320

VacLav 2 working hose reel with counter A 320

hose reel with counter (A 320) is connected to VacLav 2 adaptor for descaling aircraft waste lines

Order-number: 710.000.288

Details »

Wall cleaning device BRW 200 VA

Wall cleaning device BRW 200 VA

BRW 200 VA wall cleaning device made of stainless steel with connection for water-/water-pump vac, for hp cleaning of of walls and ceilings, graffiti removal, paint removal, working width 200 mm / 7.8 in, working pressure 350 bar / 5075 psi max., water temperature 120°C / 248°F max., 2 rotating point jet nozzles, to be coupled to hp cleaner

Please indicate desired nozzle size - see specifications of your hp cleaner.

Order-number: 710.800.690

Details »

Water filter 5" / micro filter

Water filter 5" / micro filter

Water filter/micro filter (casing with 1 filter cartridge PP) for fine-mesh filter cartridges, size 5", 50 µ, polypropylene or stainless steel, standard with all OERTZEN HP cleaners up from 280 bar / 4060 psi, filter cartridges in sets of 5 and 10 pcs. available

Order-number: 710.000.963

Details »

Water filter 9.75" / micro filter

Water filter 9.75" / micro filter

Water filter/micro filter (casing with 1 filter cartridge PP) for fine-mesh filter cartridges, size 9.75", 50 µ, polypropylene or stainless steel, filter cartridges in sets of 5 and 10 pcs. available

Order-number: 710.000.951

Details »

Water filter 5" wall mounting set

Water filter 5" wall mounting set

Water filter 5" wall mounting set for all OERTZEN HP stationary cleaners, available for 9.75" water filters as well - order no. on request

Order-number: 715.101.446

Details »

Water filter cartridge 5" 5 pieces

Water filter cartridge 5" 5 pieces

Water filter cartridge 5" made of polypropylene, reliably retains all particles larger than 50 micrometers (µ), for protection of high pressure cleaner from dirty operating water - recommended when operating at construction site (packaging size 5 pcs.) or 10 pieces with order no. 710.000.966

Order-number: 710.000.941

Details »

Water filter cartridge 9.75" 5 pieces

Water filter cartridge 9.75" 5 pieces

Water filter cartridge 9.75" made of polypropylene, reliably retains all foreign particles larger than 50 micrometers (µ), for protection of the high pressure cleaner from dirty operating water - recommended when operating at a construction site (packaging size 5 pcs.) or 10 pieces with order no. 710.000.944

Order-number: 710.000.942

Details »

Water filter insert INOX 5"

Water filter insert INOX 5"

Water filter insert INOX 5", reliably retains all particles larger than 50 micrometers (µ), for protection of high pressure cleaner from dirty operating water - recommended when operating at construction site

Order-number: 710.000.938

Details »

Water filter insert INOX 9.75"

Water filter insert INOX 9.75"

Water filter insert INOX 9.75", reliably retains all particles larger than 50 micrometers (µ), for protection of high pressure cleaner from dirty operating water - recommended when operating at construction site

Order-number: 710.000.939

Details »

Water filter for D/E 1000

Water filter for D/E 1000

Water filter - without cartridge - for OERTZEN 1000 bar / 14500 psi ultra high pressure aggregates D 1000 / E 1000

Order-number: 751.000.647

Details »

Water hose 3/4"

Water hose 3/4"

Quality water hose 3/4", sold by the metre, multi-layer braided textile sleeving max. 20 bar / 290 psi, internal and external rubber made of EPDM, max. 120°C / 248°F, resistant to oil and chemicals, other lengths and diametres on request, also with GEKA bajonet coupling on both ends available

Order-number: 710.701.021

Details »

Water hose 1"

Water hose 1"

Water hose 1"

Quality water hose 1", sold by the metre, multi-layer braided textile sleeving maximum 20 bar / 290 psi, internal and external rubber material in EPDM, maximum 120°C / 248°F, resistant to oil and chemicals, also available with GEKA coupling on both ends

Order-number: 710.701.022

Details »

Water hose 3/4" 8 m GEKA

Water hose 3/4" 8 m GEKA

Water hose 8 m / 26 in with GEKA couplings

Quality water hose 3/4", multi-layer braided textile sleeving maximum 20 bar / 290 psi, internal and external rubber made of EPDM, maximum 120°C / 248°F, resistant to oil and chemicals

Order-number: 710.701.026

Details »

Water shortage control E 200/E 240

Water shortage control E 200/E 240

Extra charged water shortage control for OERTZEN E 200/E 240, prevents damage of pump because of too low water feeding

Order-number: 710.000.707

Details »

Wetproof overall size L

Wetproof overall size L

Wetproof overall, size L, water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers, durable, colour: orange-red

Order-number: 710.800.226

Details »

Wetproof overall size M

Wetproof overall size M

Wetproof overall, size M, water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers, durable, colour: orange-red

Order-number: 710.800.225

Details »

Wetproof overall size XL

Wetproof overall size XL

Wetproof overall, size XL, water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers, durable, colour: orange-red

Order-number: 710.800.227

Details »

Wetproof overall size XXL

Wetproof overall size XXL

Wetproof overall, size XXL, water-proof polyamide fiber with zipper and velcro fastener on sleeves and trousers, durable, colour: orange-red

Order-number: 710.800.228

Details »

Wheel barrow 312 Profi

Wheel barrow 312 Profi

Trolley for OERTZEN cold water high pressure cleaner 312 Profi / 314 Profi - mobile, capable of climbing stairs, practical -
simply to be coupled to short side of frame

Ill. shows trolley/wheel barrow with 312 Profi and spray equipment and
Option: hose reel with drain cleaning hose

Order-number: 710.000.193

Details »

Spray lance 1000 bar H

Spray lance 1000 bar H

Spray lance 1000 bar H (dump gun), working pressure 1000 bar / 14500 psi, length 920 mm / 36 in, easy actuation, support handle/bar,

please order additionaly:
connecting nipple 755.000.002 for SOOPERJET ultra hp hose
swivel joint 755.000.001

Order-number: 755.000.190

Details »


Precise your search

With our accessories configurator you will find your accessory item quickly and directly.

Select options 1:
Select options 2:

Headquarters Hamburg

von Oertzen GmbH
Ferdinand-Harten-Straße 10
22949 Ammersbek / Germany
Tel: +49 40 604 11-0
Fax: +49 40 604 11 49
E-mail: info@oertzen-gmbh.de

Products viewed last:

For the time being no products have been viewed!